When the ENGINE START/STOP button is in the ACC or ON position, if any door is open, the system checks for the smart key. If the smart key is not in the vehicle, the indicator will blink, and if all doors are closed, the chime will also sound for about 5 seconds. The indicator will go off while the vehicle is moving.
Brake Switch Repair procedures
Removal
1.
Disconnect the brake switch connector (A).
2.
Pull the locking plate (A) as indicated by the arrow.
3.
Turn brake switch 45В° counterclockwise and remove it.
Inspection
1.
...
Vapor Hose and Fuel Filler Cap Repair procedures
Inspection
Vapor hose
1.
Check all the clamps for tightness and the connections for leakage.
2.
Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation.
...