Components |
1. Rear carrier assembly 2. Parking brake assembly | 3. Rear hub assembly 4. Rear brake disc |
Front Door Outside Handle Repair procedures
Replacement
1.
Remove the hole plug (A).
2.
After loosening the mounting bolt, remove the front door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8. ...
Inhibitor Switch Repair procedures
Inspection
Power Circuit Inspection
1.
Disconnect the Inhibitor switch connector.
2.
Ignition KEY "ON"" & Engine "OFF"..
3.
Measure voltage between supplied power and ground at inhi ...