Kia Sedona: Repair procedures - Steering wheel - Steering System - Kia Sedona YP Service ManualKia Sedona: Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Steering System / Steering wheel / Repair procedures

Removal
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
Remove the airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
4.
Disconnect the connector & lock nut (A) and then remove the steering wheel by using special service tools (09561-11001).

Tightening torque :
39.2 ~ 49.0 N.m (4.0 ~ 4.5 kgf.m, 28.9 ~ 36.2 lb-ft)

   
•
When removing the steering wheel, do not impact it by hammering as it may damage the steering column.

5.
Install in the reverse order of removal.
Disassembly
1.
Disconnect the remote control switch (A).

2.
Disconnect the remote control switch connector (A).

3.
Disconnect the bezel (A).

4.
Disconnect the lower cover (A).

5.
Install in the reverse order of removal.
Components and Components Location
Components 1. Bezel2. Steering wheel3. Remote control assembly4. Wiring5. Lower cover6. Multifunction switch ...

Heated Steering wheel Description and Operation
Description When manually selected, the heated steering wheel system improves the thermal comfort of the driver by heating the steering wheel. Heated pad ItemSpecificationVoltage13.5 VHeate ...

Other Information:

Engine Oil and Filter Repair procedures
Inspection Engine Oil Level     Be sure that the vehicle is on level ground. 1. Warm up and stop the engine, and then wait for 5 minutes. 2. Turn the engine off an ...

Operating precautions for catalytic converters
WARNING - Catalytic converter Keep away from the catalytic converter and exhaust system while the vehicle is running or immediately thereafter. The exhaust and catalytic systems are very hot ...

Categories


Copyright В© www.kisedona.com 2016-2024