Kia Sedona: Heated Steering wheel Repair procedures - Steering wheel - Steering System - Kia Sedona YP Service ManualKia Sedona: Heated Steering wheel Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inspection
1.
Measure the resistance of NTC and Heated pad.
–
NTC resistance : 3.42 ~ 4.18 kΩ (Standard : 25°C)
–
Heated pad resistance : 1.5 ~ 1.9 Ω (Standard : 19 ~ 21°C)
2.
Measure the temperature.
–
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute.
–
The temperature of wheel surface grip must keep 38°C after 25 minutes.
Heated Steering wheel Schematic Diagrams
System Circuit Diagram ...

Restraint
...

Other Information:

Rear Door Belt Outside Weatherstrip Repair procedures
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, remove the rear door belt outside weatherstrip (A). 3. In ...

The LDWS does not operate when
The driver turns on the turn signal or the hazard warning flasher to change lane. Driving on the lane line. ✽ NOTICE To change lanes, operate the turn signal switch then change the ...

Categories


Copyright © www.kisedona.com 2016-2024