Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or raises the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.
If the power window does not operate normally, the automatic power window system must be reset as follows:
1. Turn the ignition switch to the ON position.
2. Close the driver's and passenger's window and continue pulling up the driver
Climate Control Air Filter Repair procedures
Filter inspection
The climate control air filter should be replaced according to the maintenance schedule.
If the vehicle is operated in severely polluted city or on
dusty rough roads for a long ...
Repair procedures
Adjustment
Glass Adjustment
Check the glass run channel for damage or deterioration, and replace if necessary.
1.
Remove the rear door trim.
(Refer to Rear Door ...