Kia Sedona: Refrigerant Line Repair procedures
1. |
Discharge refrigerant from the refrigeration system. |
2. |
Replace faulty tube or hose.
Cap the open fittings immediately to keep moisture or dirt out of the system. |
|
3. |
Tighten the bolt or nut joint to the specified torque.
Connections should not be tightened to exceed the specified torque. |
|
4. |
Evacuate air in the refrigeration system and charge system with refrigerant.
Specified amount
1100 ± 25g (38.8 ± 0.88oz.)
|
|
5. |
Inspect for leakage of refrigerant.
Using a gas leak detector, check for refrigerant leakage. |
6. |
Inspect A/C operation. |
Oil Specification
1.
The HFC-134a system requires synthetic (PAG) compressor oil
whereas the R-12 system requires mineral compressor oil. The two oils
must never be mixed.
2.
Compressor (P ...
Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of the engine.
The compressor changes low pressure and low tempera ...
Other Information:
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+) and hold it.Your vehicle will accelerate. Release
the lever at the speed you want.
Move the lever up (to RES+) and release it ...
Tail Gate Latch Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...