Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the brakes are wet. If there is a risk the parking brake may freeze, apply it only temporarily while you put the gear shift lever in P (Park, automatic transaxle) and block the rear wheels so the vehicle cannot roll. Then release the parking brake.
Rail Pressure Sensor (RPS) Description and Operation
Description
Rail Pressure Sensor (RPS), installed on the delivery pipe,
measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in the s ...
Power Sliding Door (PSD) Control Module Components and Components Location
Components
Connector Pin Information
No.Connector AConnector BConnector CConnector D1-Detent Switch (Left side)Clutch Return (Left side)Logic battery 2-Child Safety Lock Switch (Left side)Quad S ...