Kia Sedona: Brake Lines, Hoses and Connections Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Brake Lines, Hoses and Connections Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Maintenance / Chassis / Brake Lines, Hoses and Connections Repair procedures

Inspection
Visually check for proper installation, chafing, cracks, deterioration and any leakage.
Replace any deteriorated or damaged parts immediately.
Brake/Clutch Fluid Repair procedures
Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid con ...

Disc Brakes and Pads Repair procedures
Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front brake disc thickness check 1. Check the brake pads for wear and fad ...

Other Information:

Specifications
Specifications ItemsSpecificationRated voltageDC 12VOperating voltage9V ~ 16VOperating speed30km/h ~ 250km/hSensible distance70m (Sedan)Curvature radiusStart : More than 100mStop : Less than 70mF ...

ESC OFF Switch Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel") 3. Remove the crash pa ...

Categories


Copyright © www.kisedona.com 2016-2024