Kia Sedona: Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Emission Control System / Crankcase Emission Control System / Repair procedures

Inspection

1.	After disconnecting the vapor hose from the PCV valve, remove the PCV valve.

2.	Reconnect the PCV valve to the vapor hose.

Inspect the PCV valve operation.

(1)	Run the engine at idle.

(2)	Touch the open end of the PCV valve on a fingertip.

(3)	Make sure that intake manifold vaccum can be felt.

The plunger inside the PCV valve will move back and forth at vacuum.

4.	If the vacuum is not felt, clean or replace the vapor hose.

Schematic Diagrams

Schematic Diagram ...

Positive Crankcase Ventilation (PCV) Valve Description and Operation

Operation Principle ...

Other Information:

Warning type
The system will activate when: 1.The system is on. 2.Vehicle speed is above 30 km/h (18.6 mph ). 3.Other vehicles are detected in the rear side. WARNING The Blind Spot Detection System with L ...

Multi Box Repair procedures
Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Kia Sedona: Repair procedures

Schematic Diagrams

Positive Crankcase Ventilation (PCV) Valve Description and Operation

Other Information:

Categories