Kia Sedona: Repair procedures - Evaporative Emission Control System - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Emission Control System / Evaporative Emission Control System / Repair procedures

Inspection
[EVAP. Leakage Test]
1.
Select "Evap. Leakage Test".

2.
Proceed with the test according to the screen introductions.

Schematic Diagrams
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when ...

Canister Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuel tank. (Refer to Engine Control / Fuel System - "Fuel Tank") 3. Disconnect the ...

Other Information:

To set cruise control speed
1.Press the CRUISE button, to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed. 30 km/h (20 mph) ~ 180 km/h (110 mp ...

Components and Components Location
Component Location 1. Overdrive Clutch (OD/C)2. One way Clutch (OWC)3. Low & Reverse Brake (LR/B)4. Underdrive Brake (UD/B)5. 26 Brake(26/B)6. 35R Clutch (35R/C)7. Damper Clutch (D/C) ...

Categories


Copyright В© www.kisedona.com 2016-2024