Kia Sedona: Engine Coolant Temperature Sensor (ECTS) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Engine Coolant Temperature Sensor (ECTS) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Engine Coolant Temperature Sensor (ECTS) Specifications

Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
48.14
-20
-4
14.13 ~ 16.83
0
32
5.79
20
68
2.31 ~ 2.59
40
104
1.15
60
140
0.59
80
176
0.32

Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...

Engine Coolant Temperature Sensor (ECTS) Description and Operation
Description Located in the engine coolant passage of the cylinder, the Engine Coolant Temperature Sensor (ECTS) is used to detect the engine coolant temperature. The ECTS uses a thermistor whos ...

Other Information:

Sunroof Inside Air Recirculation
When the heater or air conditioning system is on with the sunroof opened, the outside (fresh) air position will be automatically selected. At this time, if you press the recirculated air position ...

DRIVE mode
The drive mode may be selected according to the driver ...

Categories


Copyright © www.kisedona.com 2016-2024