Kia Sedona: Specifications - Front / Rear Parking Assist System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Front / Rear Parking Assist System / Specifications

Specifications
Item
Specification
Front/Rear parking assist system control unit
Rated voltage
DC 12V
Operation range
40~120 cm (15.7~47.2 in)
Operation voltage
DC 9V~16V
Operation current
Max. 300 mA
Operation temperature
 -30~+80 °C
Operation frequency
48 ± 5 KHz
Number of sensors
Front : 4EA(Left, Right, Center left, Center right)
Rear : 4EA(Left, Right, Center left, Center right)

Front / Rear Parking Assist System
...

Components and Components Location
Component Location 1. BCM2. Ultrasonic sensor ...

Other Information:

Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Repl ...

Front Oil Seal Repair procedures
Replacement 1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pulley") 2. Remove the front oil seal (A). 3. Using SST (09231-3C100), install a new fron ...

Categories


Copyright © www.kisedona.com 2016-2024