Description
Variable Intake manifold Solenoid (VIS) valves are installed
on the intake manifold (VIS Valve 1) and the surge tank (VIS Valve 2).
VIS valves 1 and 2 control vacuum modulators that ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between the VIS valve terminals 1 and 2.
4.
Check that the resistance is within ...
Other Information:
Repair procedures
Service Point Target Auto Calibration (SPTAC)
This procedure provides a way to calibrate the camera by
having the service technician align the car to a well lit simulated
straight road target; ...