Replacement |
Put on gloves to protect your hands. |
|
1. |
Remove the caps (A) and screws, and then remove the assist handle (B). |
2. |
Install in the reverse order of removal. |
Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor).
Repl ...
Front Seat Frame Assembly Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...