Kia Sedona: Curtain Airbag (CAB) Module Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module Description and Operation
| Description |
Curtain airbags are installed inside the headliner (LH and
RH) to protect the driver and passenger from danger when side crash
occurs. The SRSCM determines deployment of curtain airbag by using side
impact sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag
module even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury. |
Side Airbag (SAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least 30 seconds before beginning to work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat assembly")
3. ...
Other Information:
Rear Bumper beam Assembly Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. ...
Engine Control Module (ECM) Terminal Function
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [E100-A]
Pin No.DescriptionConnected to1-　2-　3-　4Immobilizer Lamp control outputImmobilizer Lamp [Without Button E ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright © www.kisedona.com 2016-2024