Kia Sedona: Driver Airbag (DAB) Module and Clock Spring Components and Components Location - Airbag Module - Restraint - Kia Sedona YP Service ManualKia Sedona: Driver Airbag (DAB) Module and Clock Spring Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring Components and Components Location

Components

1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring

Driver Airbag (DAB) Module and Clock Spring Description and Operation
Description Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash oc ...

Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal 1. Set the front tires straight-ahead before removing the steering wheel.     If the steering wheel and the front tires are not set straight ahead together, t ...

Other Information:

Barometric Pressure Sensor (BPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Pressure [kPa (kgf/cmВІ, psi)]Output Voltage (V) [Ref=5V]10.0 (0. ...

Side Airbag (SAB) Module Description and Operation
Description The Side Airbags (SAB) are installed inside the front seat to protect the driver and front passenger from danger when side crash occurs. The SRSCM determines deployment of side airb ...

Categories


Copyright В© www.kisedona.com 2016-2024