The headrest may be adjusted forward or backward by pulling the lower part of the headrest forward or backward to the desired detent in the direction of the arrow. Adjust the headrest so that it properly supports the head and neck.
CVVT Oil Temperature Sensor (OTS) Repair procedures
Inspection
[Resistance Inspection]
1.
Turn the ignition switch OFF.
2.
Remove the OTS. (Refer to "Removal")
3.
After immersing the thermistor of the sensor into engine coolant, measure ...
Power Door Mirror Actuator Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant inner cover (A).
3.
Disconnect the power door mirror connector from the harness.
4.
Apply ...