Kia Sedona: Front Door Side Weatherstrip Repair procedures - Front Door - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Door Side Weatherstrip Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Door / Front Door Side Weatherstrip Repair procedures

Replacement
1.
Loosen the front door checker (B) mounting bolt.

Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m,14.5 ~ 21.7 lb-ft)

2.
Detach the clips, and then remove the front door side weatherstrip (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Door Belt Inside Weatherstrip Repair procedures
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside weatherstrip (A). 3. Install in the reverse order of removal. ...

Rear Door
...

Other Information:

Main Crash Pad Assembly Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Ignition Coil Description and Operation
Description An ignition coil is an induction coil in an engine''s ignition system which transforms the battery''s low voltage to the high voltage needed to create an electric spark in the spark ...

Categories


Copyright В© www.kisedona.com 2016-2025