Kia Sedona: Fuel Lines, Hoses and Connections Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Maintenance / Power Train / Fuel Lines, Hoses and Connections Repair procedures

Fuel Filter Repair procedures

Replacement 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A) and fuel pump connector (B). 3. Remove the cushion pipe ...

Spark Plug Repair procedures

Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the ...

Other Information:

Brake Pedal Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad). 3. Remov ...

Latch Switch Repair procedures
Inspection 1. When inspecting, use the inspection equipment to check for input/output values at each position of Power Sliding Door control module. 2. To check the operation of latch, cho ...