Signal Waveform |
Inhibitor Switch Repair procedures
Inspection
Power Circuit Inspection
1.
Disconnect the Inhibitor switch connector.
2.
Ignition KEY "ON"" & Engine "OFF"..
3.
Measure voltage between supplied power and ground at inhi ...
Variable Intake Solenoid(VIS) Actuator Repair procedures
Removal and Installation
VIS 1 [Intake Manifold]
1.
Disconnect the battery "-" terminal.
2.
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Engine Cover")
3.
Disconne ...