Kia Sedona: Headlight bulb

WARNING - Halogen bulbs
Handle halogen bulbs with care. Halogen bulbs contain pressurized gas that
will produce flying pieces of glass if broken.
- Always handle them carefully, and avoid scratches and abrasions. If the
bulbs are lit, avoid contact with liquids. Never touch the glass with bare hands.
Residual oil may cause the bulb to overheat and burst when lit. A bulb should
be operated only when installed in a headlight.
- If a bulb becomes damaged or cracked, replace it immediately and carefully
dispose of it.
- Wear eye protection when changing a bulb. Allow the bulb to cool down before
handling it.
WARNING - HID Headlamp low beam (if equipped)
Do not attempt to replace or inspect the low beam (XENON bulb) due to electric
shock danger. If the light bulb does not operate, have your vehicle checked by an
authorized Kia dealer.
Type A
(1) Headlight (High)
(2) Headlight (Low)
(3) Turn signal light / Position light (if equipped)
(4) Side marker light
(5) Front fog light (if equipped)
(6) Position light (if equipped)
...
1. Open the hood.
2. Remove the front cover(1) and headlamp assembly nuts(2).
3. Remove the headlamp assembly from the body of the vehicle
4. Remove the headlamp bulb cover by turning it counte ...
Other Information:
Yaw-rate and G Sensor Description and Operation
Description
The yaw rate and G sensor is included inside the air bag control module (SRSCM).
When the vehicle is turning with respect to a vertical axis
the yaw rate sensor detects the yaw rate ...
Armed stage
Park the vehicle and stop the engine. Arm the system as described below.
1. Remove the ignition key from the ignition switch and exit the vehicle.
2. Make sure that all doors (and tailgate) and engi ...