Kia Sedona: Heater
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Heater
- Heater Unit Components and Components Location
- Heater Unit Repair procedures
- Heater Core Repair procedures
- Evaporator Core Repair procedures
- Temperature Control Actuator Description and Operation
- Temperature Control Actuator Repair procedures
- Mode Control Actuator Description and Operation
- Mode Control Actuator Repair procedures
Cluster Ionizer (DATC only) Repair procedures
Inspection
1.
Press the MODE switch more than 4 times within 2 seconds while pressing the OFF switch.
DisplayFail description00Normal50Cluster ion generator fault
* For diagnostic procedur ...
Heater Unit Components and Components Location
Component Location
1. Heater Unit
Components
[LH]
1. Joint Flange Pad2. Evaporator Tube Seal3. Evaporator Core Assembly4. Mode Actuator Assembly5. Mode Cam6. Heater Core Cover7. Heater ...
Other Information:
Hazard Lamp Switch Repair procedures
Inspection
1.
Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch.
Connector Pin Information
No.DescriptionNo.Description1ILL+ (TAIL)2 ...
If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine will probably be too hot. If this happens,
you should:
1.Pull off the ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright В© www.kisedona.com 2016-2025