Replacement |
|
|
1. |
Push the fixing pin (C) using a screwdriver or remover. |
2. |
Push the inside rear view mirror base (B) up to remove the inside rear view mirror assembly (A). |
3. |
Install in the reverse order of removal. |
|
1. |
Remove the ECM mirror cover (A). |
2. |
Disconnect the ECM mirror connector (A). |
3. |
Push the ECM mirror base up to remove the auto defog sensor & rain sensor cover (A). |
4. |
Install in the reverse order of removal. |
Battery Sensor Description and Operation
Description
Vehicles have many control units that use more electricity.
These units control their own system based on information from various
sensors. It is important to provide a stable power ...
Power Sliding Door (PSD) Drive Unit Repair procedures
Removal
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tap ...