Kia Sedona: Intake Air Temperature Sensor (IATS) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Intake Air Temperature Sensor (IATS) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Specifications

Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
-4
13.89 ~ 16.03
0
32
5.38 ~ 6.09
10
50
3.48 ~ 3.90
20
68
2.31 ~ 2.57
40
104
1.08 ~ 1.21
60
140
0.54 ~ 0.66
80
176
0.29 ~ 0.34

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]20.0 (0 ...

Intake Air Temperature Sensor (IATS) Description and Operation
Description Integrated into the Barometric Pressure Sensor (BPS), the Intake Air Temperature Sensor (IATS) detects the intake air temperature. To calculate precise air quantity, correction of th ...

Other Information:

Mode Control Actuator Description and Operation
Description Located in the heater unit, the mode control actuator adjusts the position of the mode door by operating the mode control actuator according to the signal from the A/C control unit. ...

Power Door Mirror Switch Components and Components Location
Components Connector Pin Information No.Connector ANo.Connector B1GND1Driver mirror holizontal_output2Mirror sensor GND_output2Driver mirror verticall_output3Driver unlock state_Input3Mirror fol ...

Categories


Copyright © www.kisedona.com 2016-2024