Circuit Diagram |
Rear Stabilizer Bar Repair procedures
Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage ...
STG Spindle Repair procedures
Removal
[LH]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tail gate trim [LH].
(Refer to Body - "Tail Gate Trim")
3.
Disconnect the STG spindle connector (A).
4.
Us ...