Kia Sedona: Power tailgate operation
- Push the power tailgate main control button on the overhead console to open
or close the power tailgate. However, the power tailgate will not open with
the main control button when all power sliding doors and power tailgate are
locked and closed. But the power tailgate will be opened with the folding key
(or smart key).
- When the power tailgate is operated with the main or sub control button
or transmitter, the chime sounds and hazard warning lights flash 2 times.
- When the power door ON/OFF button is ON (not depressed), do as follows to
open or close the power tailgate:
- Pushing the sub control button on the bottom of the tailgate will close the
power tailgate automatically.
- Pressing and pulling up the tailgate handle slightly will open the power tailgate
automatically when the tailgate is unlocked.
- When the power door ON/OFF button is OFF (depressed), the power tailgate
can not be controlled with the sub control buttons or tailgate handle. However,
the tailgate may be opened manually by pulling the exterior handle and lifting
the tailgate upward. The tailgate may be manually closed by pushing the tailgate
downward.
- Do not drive the vehicle until the power tailgate completely closed. The
power tailgate may not close completely if the vehicle is started during automatic
closing.
✽ NOTICE
The button on the tailgate will not illuminated and operated when the power
door On/OFF button is OFF (depressed).
✽ NOTICE
If the power tailgate does not operate normally, first check the following
condition before using the power tailgate.
- Make sure the shift lever is in Park
- Make sure the Power Tailgate Off switch is not pressed.
If any of the power tailgate buttons are pressed while the power tailgate
is in operation, the power tailgate will stop. If any button is pressed again the
power tailgate will reverse direction.
- Even though the Power door ON/OFF button is in the OFF (depressed) position,
if the tailgate is manually closed to the secondary latch position, the tailgate
will be electrically moved to the fully latched position. Make sure that face,
arms, hands, and other obstructions are safely out of the way before operating
the tailgate.
- The chime will sound and the hazard warning flasher will blink 10 times
if you drive with the tailgate closed but not fully secured. Stop your vehicle
immediately at a safe place to check if your tailgate is securely locked.
- Make sure there are no people or objects around the tailgate before operating
the power tailgate. Wait until the tailgate is open fully and stopped before
loading or unloading cargo or passengers from the vehicle.
- Make sure the tailgate is closed firmly before driving. If the tailgate
is open, you will draw dangerous exhaust fumes into your vehicle which can cause
serious injury or death to vehicle occupants.
- If the power tailgate is not closed and latched completely after power closing
operation, the chime will sound and hazard warning lights will blink 10 times.
Stop the driving immediately and close the tailgate securely at the safe place.
- If the power tailgate is operated while the tailgate is in the partially
opened position (more than 9degrees), the tailgate will stop the operation.
If you operate the power tailgate again, the power tailgate will be operate
in the opposite direction.
- If the power tailgate is operated while the tailgate is in the partially
closed position (less than degrees), the tailgate will open fully.
- If the power tailgate is operated while the tailgate is in the partially
opened position (less than 9degrees), the tailgate will stop at approximately
9degree open position.
The power sliding door is not automatically opened, but closed under the following
conditions. If the main or sub control button is pushed for power opening operation,
the chime sounds once.
When ...
The power tailgate will not open automatically, but will close under the following
conditions.
When the ignition switch is in the ON position,
1. Vehicle is moving above 3 km/h (2 mph).
2. The ge ...
Other Information:
In-car Sensor (DATC only) Description and Operation
Description
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor consists of a thermistor that measures the inside
temperature. The signal decided by the r ...
Special Service Tools
Special Service Tools
Tool Name / NumberIllustrationDescription09964-C1100SCC reflectorReflector to align the SCC radar09964-C1200Vertical / horizontal laserLaser to detect the center of the vehi ...