Components |
Driver Power Window Switch |
No. | Connector A | No. | Connector B |
1 | GND | 1 | Driver mirror horizontal_output |
2 | Mirror sensor GND_output | 2 | Driver mirror vertical_output |
3 | Driver unlock state_Input | 3 | Mirror folding_output |
4 | Driver key lock switch_input | 4 | Mirror unfolding_output |
5 | Driver key unlock switch_input | 5 | Driver door unlock_output |
6 | SET switch_input | 6 | Driver door lock_output |
7 | IMS switch1_input | 7 | Battery (+) mirror control |
8 | IMS switch2_input | 8 | - |
9 | Body-CAN (High) | 9 | GND Power |
10 | Body-CAN (Low) | 10 | Mirror common_output |
11 | Mirror sensor power_output | 11 | Driver mirror heater_output |
12 | - | 12 | Battery (+) |
13 | Driver door open switch_input | 13 | IGN1 |
14 | Rear driver auto_output (Safety) | 14 | Mirror horizontal sensor_input |
15 | Rear driver window (Down)_output (Safety) | 15 | Mirror vertical sensor_input |
16 | Rear driver window (Up)_output (Safety) | 16 | Battery (+) power |
17 | Window lock_output | 17 | Front driver window (Up)_output |
18 | Front driver auto_output (Safety) | 18 | Front driver window (Down)_output |
19 | Front driver window (Down)_output (Safety) |   | |
20 | Front driver window (Up)_output (Safety) | ||
21 | Safety power window enable_output | ||
22 | Tail lamp_output | ||
23 | Pocket lamp_output | ||
24 | Window lock_output 2 | ||
25 | Front assist window (Up)_output (Safety) | ||
26 | Front assist window (Down)_output (Safety) | ||
27 | Front assist auto_output (Safety) | ||
28 | Rear assist window (Up)_output (Safety) | ||
29 | Rear assist window (Down)_output (Safety) | ||
30 | Rear assist auto_output (Safety) | ||
31 | - | ||
32 | - |
Assist Power Window Switch |
No. | Connector A | No. | Connector B |
1 | Mirror sensor power_output | 1 | Battery (+) power |
2 | Mirror horizontal sensor_input | 2 | - |
3 | Mirror vertical sensor_input | 3 | IGN1 |
4 | Front assist window switch (Up)_output (Safety) | 4 | Battery (+) |
5 | Front assist window switch (Down)_output (Safety) | 5 | - |
6 | Front assist auto_output (Safety) | 6 | Mirror common_output |
7 | Window lock_output | 7 | Assist mirror heater_output |
8 | Rear assist window switch (Up)_output (Safety) | 8 | Pocket lamp_output |
9 | Rear assist window switch (Down)_output (Safety) | 9 | Safety power window enable_output |
10 | Rear assist auto_output (Safety) | 10 | Front assist window (Up)_output |
11 | Mirror sensor GND_output | 11 | Front assist window (Down)_output |
12 | Body CAN (Low) | 12 | - |
13 | Body CAN (High) | 13 | GND_Power |
14 | Door lock_output | 14 | - |
15 | - | 15 | - |
16 | - | 16 | Battery (+) mirror control |
17 | Door unlock_output | 17 | Assist mirror vertical_output |
18 | - | 18 | Assist mirror horizontal_output |
19 | - |   | |
20 | GND |
No. | Connector A (Manual Type) | No. | Connector A (Safety Type) |
1 | - | 1 | Tail lamp_input |
2 | Tail lamp_input | 2 | - |
3 | Door lock | 3 | Door lock |
4 | Door unlock | 4 | Door unlock |
5 | - | 5 | - |
6 | Battery (+) | 6 | GND |
7 | GND | 7 | Battery (+) |
8 | Driver window (Up)_input | 8 | - |
9 | Driver window (Down)_input | 9 | Auto_output |
10 | Front assist window (Up)_output | 10 | Front assist window (Up)_output |
11 | Front assist window (Down)_output | 11 | Front assist window (Down)_output |
12 | Driver safety enable_input | 12 | - |
Rear Power Window Switch |
Inhibitor Switch Description and Operation
Description
•
The inhibitor switch is installed on top of transaxle, and is connected to the shift lever through shift cable.
•
Inhibitor switch signals (S1, S2, S3, S4) are t ...
IMS Control Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Install the driver''s door trim.
(Refer to Body - "Front Door Trim")
3.
Remove the IMS switch (A) after loosening the screws.
...