Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
After loosening the mounting screws, remove the rear door inside handle (A).
3.
Disconnect the rear d ...
Other Information:
Height Adjust Repair procedures
Replacement
1.
Remove the center piller upper trim.
(Refer to Interior Trim - "Center Piller Trim")
2.
After loosening the mounting bolts, remove the height adjust (A).
Tightening torque ...
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS (Refer to "Removal").
4.
After immersing the thermistor of the sensor into engine coola ...