Kia Sedona: Roof Side Moulding Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Side Moulding Repair procedures

Replacement

[General Type]

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Using a screwdriver or remover, remove the roof side moulding (A).

Install in the reverse order of removal.

Replace any damaged clips.

[Roof Rack Type]

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Remove the roof rack assembly. (Refer to Body Side Moulding - "Roof Rack")

2.	Using a screwdriver or remover, remove the roof side moulding (A).

Install in the reverse order of removal.

Replace any damaged clips.

Roof Rack Repair procedures

Replacement [General Type] Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with pro ...

Rear Spoiler Repair procedures

Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Crankshaft Position Sensor (CKPS) Description and Operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engin ...

Reservoir Tank Repair procedures
Removal and Installation 1. Disconnect the over flow hose (A), and then drain the coolant from the reservoir tank. 2. Remove the reservoir tank (B). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ...

Kia Sedona: Roof Side Moulding Repair procedures

Roof Rack Repair procedures

Rear Spoiler Repair procedures

Other Information:

Categories