Kia Sedona: Seat Belt Buckle Switch (BS) Components and Components Location - SRSCM - Restraint - Kia Sedona YP Service ManualKia Sedona: Seat Belt Buckle Switch (BS) Components and Components Location

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Components and Components Location

Components

Seat Belt Buckle Switch (BS) Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status inp ...

Seat Belt Buckle Switch (BS) Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. 2. Remove the front seat assembly. (Refer to Body - "Front seat") 3. Loosen th ...

Other Information:

Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly. Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P (Park) position a ...

Front Pillar Trim Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Categories


Copyright В© www.kisedona.com 2016-2025