Kia Sedona: Specifications
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Specifications
| Specifications |
Automatic Transaxle
| Item | Specification | |
| Transaxle model | A6LF2 | |
| Engine model | Gasoline 3.3 GDI | |
| Torque converter type | 3-element, 1-stage, 2-phase type | |
| Torque converter size | Ø260mm (10.2362 in.) | |
| Oil pump type | Parachoid | |
| *ATF | Capacity | 7.8 liters (2.06 U.S gal., 8.24 U.S.qt., 6.86 Imp.qt.) |
| Type | Kia Genuine ATF SP-Ⅳ or equivalent | |
| Gear ratio | 1st | 4.252 |
| 2nd | 2.654 | |
| 3rd | 1.804 | |
| 4th | 1.386 | |
| 5th | 1.000 | |
| 6th | 0.772 | |
| Reverse | 3.393 | |
| Final gear ratio | 3.041 | |
| Component elements | Oil filter | 1EA |
| Clutch | 2EA | |
| One-way clutch | 1EA | |
| Brake | 3EA | |
| Planetary gear | 3EA | |
| Fluid pressure balance piston | 2EA | |
| Accumulator | 4EA | |
| Solenoid valve | 8EA (*VFS:6EA, ON/OFF:2EA) | |
*ATF: Automatic Transaxle Fluid
*VFS: Variable Force Solenoid
Inhibitor Switch
| Item | Specification |
| Power supply (V) | 12 |
| Output type | Combination of output signals |
Signal Code Table
| | P | P-R | R | R-N | N | N-D | D |
| Signal "1" | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| Signal "2" | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| Signal "3" | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| Signal "4" | 0 | 0 | 0 | 0 | 0 | 12V | 12V |
Sensors
| Item | Specification | |
| Oil temperature sensor | Type | *NTC thermistor |
| Temp.[(°C)°F] / Resistance (kΩ) | (-40)-40 / 48.1 | |
| (-20)-4.0 / 15.6 | ||
| (0)32.0 / 5.88 | ||
| (20)68.0 / 2.51 | ||
| (40)104.0 / 1.19 | ||
| (60)140.0 / 0.61 | ||
| (80)176.0 / 0.32 | ||
| (100)212.0 / 0.18 | ||
| (120)248.0 / 0.10 | ||
| (140)284.0 / 0.06 | ||
| (150)302.0 / 0.05 | ||
| Input speed sensor | Type | Hall effect sensor |
| Operation condition (°C)°F | (-40 ~ 150)-40 ~ 302 | |
| Output voltage (V) | High: 1.18 ~ 1.68 | |
| Low: 0.59 ~ 0.84 | ||
| Output speed sensor | Type | Hall effect sensor |
| Operation condition (°C)°F | (-40 ~ 150)-40 ~ 302 | |
| Output voltage (V) | High: 1.18 ~ 1.68 | |
| Low: 0.59 ~ 0.84 | ||
*NTC: Negative Temperature Coefficient
Solenoid Valves
| Item | Specification | |
| *T/CON_VFS | Control type | N/L (Normal Low) |
| Control pressure kpa (kgf/cm², psi) | 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) | |
| Current value (mA) | 50 ~ 850 | |
| Coil resistance(Ω) | 5.1 ± 0.3 | |
| *35R/C_VFS | Control type | N/H (Normal High) |
| Control pressure kpa (kgf/cm², psi) | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) | |
| Current value (mA) | 50 ~ 850 | |
| Coil resistance(Ω) | 5.1 ± 0.3 | |
| *26/B_VFS | Control type | N/L (Normal Low) |
| Control pressure kpa (kgf/cm², psi) | 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) | |
| Current value (mA) | 50 ~ 850 | |
| Coil resistance(Ω) | 5.1 ± 0.3 | |
| *UD/B_VFS | Control type | N/H (Normal High) |
| Control pressure kpa (kgf/cm², psi) | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) | |
| Current value (mA) | 50 ~ 850 | |
| Coil resistance(Ω) | 5.1 ± 0.3 | |
| *OD/C_VFS | Control type | N/H (Normal High) |
| Control pressure kpa (kgf/cm², psi) | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) | |
| Current value (mA) | 50 ~ 850 | |
| Coil resistance(Ω) | 5.1 ± 0.3 | |
| *Line_VFS | Control type | N/H (Normal High) |
| Control pressure kpa (kgf/cm², psi) | 500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42) | |
| Current value (mA) | 50 ~ 850 | |
| Coil resistance(Ω) | 5.1 ± 0.3 | |
| *SS-A_ON/OFF | Control type | ON/OFF |
| Current value (mA) | 5.0 | |
| Coil resistance(Ω) | 10 ~ 11 | |
| *SS-B_ON/OFF | Control type | ON/OFF |
| Current value (mA) | 5.0 | |
| Coil resistance(Ω) | 10 ~ 11 | |
*T/CON_VFS: Torque converter control solenoid valve
*35R/C_VFS: 35R clutch control solenoid valve
*26/B_VFS: 26 Brake control solenoid valve
*UD/B_VFS: Underdrive brake control solenoid valve
*OD/C_VFS: Overdrive clutch control solenoid valve
*LINE_VFS: Line pressure control solenoid valve
*SS-A_ON/OFF: Shift control solenoid valve-A
*SS-A_ON/OFF: Shift control solenoid valve-B
Solenoid Valve Operation Table
| | SS-A_ON/OFF | SS-B_ON/OFF | UD/B_VFS | OD/C_VFS | 35R/C_VFS | 26/B_VFS |
| N/H | N/H | N/H | N/L | |||
| N, P | ● | | ● | | ● | |
| 1 | Δ | | | Δ | ● | |
| 2 | | | | ● | ● | ● |
| 3 | | ● | | ● | | |
| 4 | | | | | ● | |
| 5 | | ● | ● | | | |
| 6 | | | ● | | ● | ● |
| R | ● | ● | ● | | | |
● : Connected status
Δ : Connected at vehicle speed above 8km/h
Clutch & Brake Operation Table
| | Clutch | Brake | ||||
| OD/C | 35R/C | OWC | LR/B | UD/B | 26/B | |
| N, P | | | | ● | | |
| 1 | | | ● | Δ | ● | |
| 2 | | | | | ● | ● |
| 3 | | ● | | | ● | |
| 4 | ● | | | | ● | |
| 5 | ● | ● | | | | |
| 6 | ● | | | | | ● |
| R | | ● | | ● | ● | |
● : Operated status
Δ : Released at vehicle speed above 8km/h
Tightening Torques
| Item | N.m | Kgf.m | lb-ft |
| Manual control lever mounting nut | 17.7 ~ 24.5 | 1.8 ~ 2.5 | 13.0 ~ 18.1 |
| Inhibitor switch mounting nut | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Shift cable bracket mounting bolt | 14.7 ~ 21.6 | 1.5 ~ 2.2 | 10.8 ~ 15.9 |
| Shift cable mounting nut | 9.8 ~ 13.7 | 1.0 ~ 1.4 | 7.2 ~ 10.1 |
| Shift cable retainer mounting nut | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 |
| Shift lever mounting bolt | 8.8 ~ 13.7 | 0.9 ~ 1.4 | 6.5 ~ 10.1 |
| Torque converter mounting bolt | 45.1 ~ 52.0 | 4.6 ~ 5.3 | 33.3 ~ 38.3 |
| Transaxle support bracket mounting bolt & nut | 58.9 ~ 78.5 | 6.0 ~ 8.0 | 43.4 ~ 57.8 |
| Transaxle mounting bracket bolt | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Roll rod support bracket mounting bolt | 49.0 ~ 68.6 | 5.0 ~ 7.0 | 36.2 ~ 50.6 |
| Roll rod bracket mounting bolt | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
| 107.9 ~ 127.5 | 11.0 ~ 13.0 | 79.6 ~ 94.0 | |
| Starter mounting bolt | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
| Transaxle upper mounting bolt | 63.7 ~ 83.4 | 6.5 ~ 8.5 | 47.0 ~ 61.5 |
| 32.4 ~ 49.0 | 3.3 ~ 5.0 | 23.9 ~ 36.2 | |
| Transaxle lower mounting bolt | 78.5 ~ 98.1 | 8.0 ~ 10.0 | 57.9 ~ 72.3 |
| 39.2 ~ 46.1 | 4.0 ~ 4.7 | 28.9 ~ 34.0 | |
| ATF filler plug (eyebolt) | 4.9 ~ 5.9 | 0.5 ~ 0.6 | 3.6 ~ 4.3 |
| ATF drain plug | 33.3 ~ 43.1 | 3.4 ~ 4.4 | 24.6 ~ 31.8 |
| Transaxle control module mounting nut | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Valve body cover mounting bolt | 11.8 ~ 13.7 | 1.2 ~ 1.4 | 8.7 ~ 10.1 |
| Valve body assembly mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Solenoid valve harness mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Solenoid valve connector fixing clip mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Solenoid valve support bracket mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Oil temperature sensor mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
| Input & output speed sensor mounting bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
Special Service Tools
Special Service Tools
Tool Name / NumberIllustrationDescriptionEngine support fixture (bar)09200-3N000Used for holding engine assembly when removing / installing transaxleUsed with the adapter (0 ...
Other Information:
Climate Seat Unit Schematic Diagrams
Circuit Diagram
...
Components and Components Location
Component Location Index
Engine Room
1. Ambient temperature Sensor2. Receiver-drier3. Condenser4. Compressor5. Discharge Hose6. Service Port (Low Pressure)7. Service Port (High Pressure)8. A/C P ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright © www.kisedona.com 2016-2024