Kia Sedona: Transaxle Control Module (TCM) Description and Operation
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Control Module (TCM) Description and Operation
| Description |
The module receives and processes signals from various
sensors and implements a wide range of transaxle controls to ensure
optimal driving conditions for the driver.
Functions
| • |
Monitors the vehicle''s operating conditions to determine the optimal gear setting. |
| • |
Performs a gear change if the current gear setting differs from the identified optimal gear setting. |
| • |
Determines the need for torque converter clutch activation and engages the clutch accordingly. |
| • |
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly. |
| • |
Diagnoses the faults and failures for automatic transaxle. |
| Operation |
Transaxle Control Module (TCM) Components and Components Location
Component Location
1. Transaxle Control Module (TCM) ...
Transaxle Control Module (TCM) Schematic Diagrams
TCM Connector
TCM terminal function
Connector [A]
PinDescription10CAN (High)27Ignition switch29Sports mode up switch35CAN (Low)44Inhibitor switch signal ''S1''45Inhibitor switch signal ''S2''4 ...
Other Information:
General Information
Basic Service Symbols
There are five primary symbols used to complement
illustrations. These symbols indicate the part to apply such materials
during service.
SymbolMeaningDo not reuse the p ...
Idler Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt idler (A).
Tightening torque :
53.9 ~ 57.9 N.m (5.5 ~ 5.9 kgf.m, 39.8 ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright © www.kisedona.com 2016-2024