Kia Sedona: Input Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Input Speed Sensor Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications

Specification
Item
Specification
Type
Hall effect sensor
Operation condition (°C)°F
(-40 ~ 150)-40 ~ 302
Output voltage (V)
High: 1.18 ~ 1.68
Low: 0.59 ~ 0.84

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Input Speed Sensor Components and Components Location
Component Location 1. Output speed sensor 2. Input speed sensor ...

Other Information:

Repair procedures
Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. R ...

To decrease the cruising speed
Follow either of these procedures: Move the lever down (to SET-) and hold it. Your vehicle will gradually slow down. Release the lever at the speed you want to maintain. Move the lever down ...

Categories


Copyright © www.kisedona.com 2016-2025