Kia Sedona: Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Steering System / Steering wheel / Repair procedures

Removal

1.	Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.

2.	Turn the steering wheel so that the front wheels can face straight ahead.

3.	Remove the airbag module. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")

Disconnect the connector & lock nut (A) and then remove the steering wheel by using special service tools (09561-11001).

Tightening torque :

39.2 ~ 49.0 N.m (4.0 ~ 4.5 kgf.m, 28.9 ~ 36.2 lb-ft)

•	When removing the steering wheel, do not impact it by hammering as it may damage the steering column.

5.	Install in the reverse order of removal.

Disassembly

1.	Disconnect the remote control switch (A).

2.	Disconnect the remote control switch connector (A).

3.	Disconnect the bezel (A).

4.	Disconnect the lower cover (A).

5.	Install in the reverse order of removal.

Components and Components Location

Components 1. Bezel2. Steering wheel3. Remote control assembly4. Wiring5. Lower cover6. Multifunction switch ...

Heated Steering wheel Description and Operation

Description When manually selected, the heated steering wheel system improves the thermal comfort of the driver by heating the steering wheel. Heated pad ItemSpecificationVoltage13.5 VHeate ...

Other Information:

Rear Sub Frame Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage ...

Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) ...

Kia Sedona: Repair procedures

Components and Components Location

Heated Steering wheel Description and Operation

Other Information:

Categories