Removal
1.
Remove the rear wheel speed sensor connector (A).
2.
Remove the rear wheel speed sensor.
(Refer to Driveshaft and Axle - "Rear Hub - Carrier")
3.
Install in the reverse order o ...
Other Information:
License plate light bulb replacement
1. Loosen the lens retaining screws with a phillips head screwdriver.
2. Remove the lens.
3. Remove the bulb by pulling it straight out.
4. Install a new bulb.
5. Reinstall the lens securely wit ...
Digital speedometer
Type B, C
This mode displays the current speed of the vehicle. ...