Adjustment |
1. |
After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up and down, or right and left. |
2. |
Adjust the tail gate height by turning the tail gate overslam bumpers (B). |
3. |
After loosening the tail gate striker (C) mounting bolts,
adjust the tail gate striker by moving it up and down, or right and
left. |
License plate light bulb replacement
1. Loosen the lens retaining screws with a phillips head screwdriver.
2. Remove the lens.
3. Remove the bulb by pulling it straight out.
4. Install a new bulb.
5. Reinstall the lens securely wit ...
Driver's Attention
The driver must be cautious in the below situations for the system may not assist
the driver and may not work properly.
- Curved roads, tollgates, etc.
- The surrounding of the sensor is polluted ...