Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
2. |
Remove the front door inside handle cage (A). |
3. |
Loosen the screw and remove the IMS switch. |
4. |
After loosening the mounting screws, remove the front door inside handle (A). |
5. |
Install in the reverse order of removal.
|
Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between the VIS valve terminals 1 and 2.
4.
Check that the resistance is within ...
Drive Belt Tensioner Repair procedures
Removal and Installation
1.
Remove the drive belt idler.
(Refer to Timing System - "Idler")
2.
Remove the drive belt auto tensioner (A).
Tightening torque
Bolt (B) :
81.4 ~ 85.3 N.m (8. ...