Kia Sedona: Rear Wheel Guard Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Wheel Guard Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Wheel Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
Remove the rear mud guard.
(Refer to Body Side Moulding - "Rear Mud Guard")
3.
After loosening the mounting clips and screws, remove the front wheel guard (A).

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Wheel Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Front Mud Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Output Speed Sensor Description and Operation
Description • Output speed sensor uses an electric current type hall sensor in which the current is changed by the magnetic variation. • Output speed sensor (A) and input speed ...

Keep paint and trim in good condition
Scratches or chips in the finish should be covered with "touch-up" paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the attention of a ...

Categories


Copyright © www.kisedona.com 2016-2024