Components |
No. | Connector A | Connector B | Connector C | Connector D |
1 | - | MM CAN (+) | Chassis CAN (-) | GND |
2 | - | - | Chassis CAN (+) | GND |
3 | - | - (Parking) | - | - |
4 | - | - | - | GND |
5 | M GND (SPDIF GND) | - | - | Illumination (-) |
6 | SPDIF (+) | - | Back view camera : (-) AVM : M GND | Illumination (+) |
7 | - | - | Back view camera : (-) AVM : Camera C | Key right |
8 | Illumination (+) | AUX right | Back view camera : (-) AVM : Video GND C | Key left |
9 | R Position | AUX GND | - | Right CW |
10 | - | MIC (+) | - | Left CCW |
11 | - | Battery (+) | Body CAN (+) | Left CW |
12 | - | Battery (+) | Body CAN (-) | Right CCW |
13 | - | MM CAN (-) | Back view camera : (-) AVM : M GND |       |
14 | IGN1 | - (Auto Light) | Air bag | |
15 | SPDIF (-) | P Position | - | |
16 | Door unlock | Speed | Navi voice (-) | |
17 | Illumination (-) | M GND (R GND) | Navi voice (+) | |
18 | Remote antenna | ACC | Door open | |
19 |   | - | - | |
20 | AUX Detect | - | ||
21 | AUX left | M GND | ||
22 | Mic (-) | V GND | ||
23 | M GND | Camera VIN(Y) | ||
24 | M GND | Back view camera : Camera B AVM : (-) |
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
AcceleratorPositionOut ...
Latch Switch Repair procedures
Inspection
1.
When inspecting, use the inspection equipment to check for
input/output values at each position of Power Sliding Door control
module.
2.
To check the operation of latch, cho ...