Kia Sedona: Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P (Park) position and setting the parking brake.
2. Go to the front of the vehicle, raise the hood slightly, pull up the secondary latch (1) inside of the hood center and lift the hood (2).
3. Pull out the support rod.
4. Hold the hood opened with the support rod.
✽ NOTICE - Hot parts
Grab the support rod in the area wrapped in rubber. The plastic will help prevent you from being burned by hot metal when the engine is hot.
Hood
...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the
...
Other Information:
To unfasten the rear center belt
1. Press the release button on the buckle (D) and remove the tongue plate (B)
from the buckle (D).
2. To retract the rear center seatbelt, insert the tongue plate or similar small
rigid devic ...
Power Seat Control Switch Repair procedures
Inspection
Diagnosis With GDS
1.
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following in ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual