Kia Sedona: Ignition Switch Assembly

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Ignition Switch Assembly

Repair procedures

Removal [Horn (Low pitch)] 1. Remove the engine room under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the mounting clip (A). 3. Remove the low pitch ...

Repair procedures

Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continu ...

Other Information:

Outside lamp
1. Open the tailgate. 2. Loosen the lamp assembly retaining screws with a philips head screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Remove the so ...

Temperature Control Actuator Description and Operation
Description The heater unit includes mode control actuator and temperature control actuator. Located in the heater unit, the temperature control actuator regulates the temperature in the following ...