Kia Sedona: Specifications
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Smart key System / Specifications
| Specifications |
Smart Key Unit
| Items | Specification |
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -22°F ~ 167°F (-30°C ~ 75°C) |
| Load | Max. 2.9mA (When welcome light function off) |
RF Receiver
| Items | Specification |
| Frequency | 433.92 Mhz |
| Antenna type | FSK (Frequency Shift Keying) |
Smart Key Fob
| Items | Specification | ||||
| Battery | Lithium battery 3V 1EA | ||||
| Distance | 30m from vehicle, RF : 30m, Passive(LF) : 0.7m | ||||
| Battery life | More than 2 years (10 times / a day)
| ||||
| Push buttons | Bitmap 6 (Door lock / unlock, Tailgate, Panic, Power sliding door [LH, RH]) | ||||
| Frequency(Rx) | 125 kHz | ||||
| Frequency(Tx) | 433.92 MHz | ||||
| Numbers | 2EA |
Antenna
| Items | Specification |
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -22°F ~ 167°F (-30°C ~ 75°C) |
| Frequency | 125kHz |
| Numbers | Interior(3EA), Door(2EA), Bumper(1EA) |
Smart key System
...
Components and Components Location
Component Location (1)
1. Smart key unit (SMK)2. Interior antenna 23. Interior antenna 14. Buzzer5. Door outside handle
Component Location (2)
1. Bumper antenna2. Tail gate open switch3. In ...
Other Information:
Front Door Latch Repair procedures
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.
...
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P (Park) position a ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright © www.kisedona.com 2016-2024