While the vehicle is moving rearward, the outside rearview mirror(s) will move downward to aid reverse parking. According to the position of the outside rearview mirror switch (1), the outside rearview mirror(s) will operate as follows:
L/R : When the remote control outside rearview mirror switch is selected to the L (left) or R (right) position, both outside rearview mirrors will move downward.
Neutral : When neither switch is selected, the outside rearview mirrors will not operate.
The outside rearview mirrors will automatically revert to their original positions under the following conditions :
1. The ignition switch is in the OFF position.
2. Shift lever is moved to any position except R (Reverse).
3. Remote control outside rearview mirror switch is placed in the middle.
Ignition Coil Repair procedures
Removal
Ignition coil (Cylinder #1) [Bank 1]
1.
Remove the surge tank.
(Refer to Engine Mechanical System - "Surge Tank")
2.
Disconnect the Ignition coil connector (A).
3.
Remove the i ...
Components and Components Location
Components
1. Rear bumper side under cover2. Rear bumper side under cover3. Rear bumper beam assembly4. Rear bumper side lower bracket [LH]5. Rear bumper side lower bracket [RH]6. Rear bumper si ...