Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if equipped) on.
Description and Operation
System Configuration
PAS consists of 8 sensors (4 front & 4 rear) that detect
obstacles and transmit the result separately in three warning levels,
the first, second and third to IPM (BCM) ...
Personal Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the personal lamp (A) using a flat-tip screwdriver.
3.
Disconnect the personal lamp connector (A).
Installation
1.
C ...