Type A
Type B
1.Press the CRUISE button on the steering wheel to turn the system on.The CRUISE indicator light in the instrument cluster will illuminate.
2.Accelerate to the desired speed, which must be more than 40 km/h (25 mph).
3.Move the lever down (to SET-), and release it at the desired speed.The SET indicator light in the instrument cluster will illuminate. Release the accelerator at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down or speed up slightly while going downhill.
Alternator Repair procedures
Removal
1.
Disconnect the battery negative (-) terminal.
2.
Remove the cooling fan.
(Refer to Engine Mechanical System - "Cooling Fan")
3.
Lift the vehicle.
4.
Remove the engine room ...
Heater Core Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the nuts and bolts, remove the main crash pad and cowl cross bar assembly (A) altogether.
(Refer to Heater - "H ...