Type A
Type B (for SXL package)
The 2nd row seats have the armrest located on the side of seatback.
Type A
To use the armrest, swing down the armrest to the lowest position.
Type B
To use the armrest, press the release button
(1) on the armrest and adjust the angle to the desired position. And then release the button (1).
Room Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.
3.
Remove the room lamp (A) after loosening the screws. ...
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...