Kia Sedona: Sensor to detect distance to the vehicle ahead
The sensor detects distance to the vehicle ahead.
If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle
distance control may not operate correctly.
Always keep the sensor clean.
Sensor malfunction indicator
If the sensor or cover is dirty or obscured with foreign matter such as snow,
the indicator will illuminate. Clean the sensor by using a soft cloth.
SCC malfunction indicator
The warning light illuminates when the vehicle to vehicle distance control system
is not functioning normally.
Take your vehicle to an authorized Kia dealer and have the system checked.
- Always keep the sensor and bumper clean.
- Use only a genuine Kia sensor cover for your vehicle.
CAUTION
- Do not install accessories around the sensor and do not replace the bumper
by yourself. It may interfere with the sensor performance.
- To prevent sensor cover damage from occurring, wash the car with a soft
cloth.
- Do not damage the sensor or sensor area by a strong impact. If the sensor
moves slightly off position, the SCC will not operate correctly. If this occurs,
have your vehicle checked by an authorized Kia dealer as soon as possible.
This function allows you to program the vehicle to maintain relative distance
to the vehicle ahead without depressing the accelerator pedal or brake pedal.
The vehicle to vehicle distance will au ...
The sensitivity of vehicle speed when following the front vehicle to maintain
the set distance can be adjusted. Go to the User Settings Mode (Driving Assist)
and select SCC (Smart Cruise Control ...
Other Information:
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...
Steering Angle Sensor Description and Operation
Description
Installed in MDPS (Motor Driven Power Steering), the Steering
Angle Sensor (SAS) sends signals to HECU through CAN communication
line.
The SAS is used to determine turning directio ...