Kia Sedona: Using a child restraint system - Child restraint system - Safety features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: Using a child restraint system

Third generation YP (2014-2024) / Kia Sedona YP Owners Manual / Safety features of your vehicle / Child restraint system / Using a child restraint system

Rearward-facing child restraint system

Forward-facing child restraint system

For small children and babies, the use of a child seat or infant seat is required. The child seat or infant seat should be of appropriate size for the child and should be installed in accordance with the manufacturer's instructions.

For safety reasons, we recommend that the child restraint system be used in the rear seats.

Never place a rear-facing child restraint in the front passenger seat, because of the danger an inflating passenger-side air bag could impact the rear-facing child restraint and kill the child.

Since all passenger seat belts move freely under normal conditions and only lock under extreme or emergency conditions (emergency lock mode), you must manually change these seat belts to the auto lock mode to secure a child restraint.

If the seat belt does not operate as described in this section, have the system checked immediately by your authorized Kia dealer.

Child restraint system
Children riding in the vehicle should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accid ...

Placing a passenger seat belt into the auto lock mode
The auto lock mode will help prevent the normal movement of the child in the vehicle from causing the seat belt to loosen and compromise the child restraint system. To secure a child restraint s ...

Other Information:

Rear Bumper beam Assembly Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Tail Gate Weatherstrip Repair procedures
Replacement 1. Remove the rear transverse trim. (Refer to Interior Trim - "Rear Transverse Trim") 2. Remove the tail gate weatherstrip (A).     Do not apply sealant ...

Categories


Copyright В© www.kisedona.com 2016-2024