Kia Optima Manuals

Kia Sedona: ETC (Electronic Throttle Control) System Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: ETC (Electronic Throttle Control) System Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / ETC (Electronic Throttle Control) System Specifications

Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V) [Ref=5V]
TPS1
TPS2
0
0.5
4.5
10
0.96
4.05
20
1.41
3.59
30
1.87
3.14
40
2.32
2.68
50
2.78
2.23
60
3.23
1.77
70
3.69
1.32
80
4.14
0.86
90
4.6
0.41
98
4.65
0.35
C.T (0)
0.5
4.5
W.O.T (86)
4.41
0.59

[ETC Motor]
Item
Specification
Coil Resistance (Ω)
0.3 ~100 [20°C(68°F)]

Injector Drive Box (IDB) Repair procedures
Removal 1. Turn the ignition switch off and disconnect the battery negative (-) Terminal. 2. Remove the mounting nuts (A) and disconnect the connector (B), and then remove the injector drive b ...

ETC (Electronic Throttle Control) System Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cab ...

Other Information:

Rear Hub - Carrier Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to dama ...

Tire pressure
Always observe the following: Check tire pressure when the tires are cold. (After vehicle has been parked for at least three hours or hasn't been driven more than 1.6 km (one mile) since ...

Categories


Copyright © www.kisedona.com 2016-2025