Kia Sedona: Side Airbag (SAB) Module Description and Operation - Airbag Module - Restraint - Kia Sedona YP Service ManualKia Sedona: Side Airbag (SAB) Module Description and Operation

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and Operation

Description
The Side Airbags (SAB) are installed inside the front seat to protect the driver and front passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.
   
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. 2. Remove the main crash pad. (Refer to Body - "main crash pad assembly ") ...

Side Airbag (SAB) Module Components and Components Location
Components ...

Other Information:

Storing positions into memory using the buttons on the door
Storing driver ...

Components and Components Location
Component Location 1. DDM (Driver Door Module)2. BCM & RF receiver3. Door lock switch4. Tail gate lock actuator & switch5. Front door lock actuator & switch6. Rear door lock actuator ...

Categories


Copyright В© www.kisedona.com 2016-2025